Mastercut #40 Blade
$31.99$28.79In Stock
Click HERE to see all Blades
- Superior quality Mastercut #40 blade (0.25mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #30 Blade
$31.99$28.79In Stock
Click HERE to see all Blades
- Superior quality Mastercut #30 blade (0.5mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #15 Blade
$31.99$28.79In Stock
Click HERE to see all Blades
- Superior quality Mastercut #15 blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #10 Blade
$31.99$28.79In Stock
- Superior quality Mastercut #10 blade (1.6mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut #7F Blade
$36.99$33.29In Stock
Click HERE to see all Blades
- Superior quality Mastercut #7F blade (3.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #5F Blade
$34.99$31.49In Stock
Click HERE to see all Blades
- Superior quality Mastercut #5F blade (6.3mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #4F Blade
$42.99$38.69In Stock
Click HERE to see all Blades
- Superior quality Mastercut #4F blade (9.5mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #3F Blade
$48.99$44.09In Stock
Click HERE to see all Blades
- Superior quality Mastercut #3F blade (13mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #15W Wide Blade
$44.99$40.49In Stock
Click HERE to see all Blades
- Superior quality Mastercut #15w wide blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on wide combs from Mastercut (also sold under different names, including Furzone and AGS wide combs)
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #10W Wide Blade
$44.99$40.49In Stock
Click HERE to see all Blades
- Superior quality Mastercut #10w wide blade (1.6mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on wide combs from Mastercut (also sold under different names, including Furzone and AGS wide combs)
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #7FW Wide Blade
$49.99$44.99In Stock
Click HERE to see all Blades
- Superior quality Mastercut #7fw wide blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on wide combs from Mastercut (also sold under different names, including Furzone and AGS wide combs)
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #6FW Wide Blade
$54.99$49.49In Stock
Click HERE to see all Blades
- Superior quality Mastercut #6fw wide blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on wide combs from Mastercut (also sold under different names, including Furzone and AGS wide combs)
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #5FW Wide Blade
$52.99$47.69In Stock
Click HERE to see all Blades
- Superior quality Mastercut #5fw wide blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on wide combs from Mastercut (also sold under different names, including Furzone and AGS wide combs)
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #4FW Wide Blade
$58.99$53.09In Stock
Click HERE to see all Blades
- Superior quality Mastercut #4fw wide blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on wide combs from Mastercut (also sold under different names, including Furzone and AGS wide combs)
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #7 22mm ⅞” Wide Comb Attachment
$27.97$21.99In Stock
ALL CLEARANCE SALES ARE FINAL. Mastercut's super wide comb attachment, the perfect finishing tool for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- life-changing wide comb attachment
- 22mm (7/8″) clipping height
- Strong and rigid stainless steel teeth
- Fits Mastercut #30w or #15w wide blade
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut #8 25mm 1″ Wide Comb Attachment
$27.97$19.99In Stock
ALL CLEARANCE SALES ARE FINAL. Mastercut's super wide comb attachment, the perfect finishing tool for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- life-changing wide comb attachment
- 25mm (1″) clipping height
- Strong and rigid stainless steel teeth
- Fits Mastercut #30w or #15w wide blade
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut #10 32mm 1.25″ Wide Comb Attachment
$29.97$19.99In Stock
ALL CLEARANCE SALES ARE FINAL. Mastercut's super wide comb attachment, the perfect finishing tool for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- life-changing wide comb attachment
- 32mm (1 1/4″) clipping height
- Strong and rigid stainless steel teeth
- Fits Mastercut #30w or #15w wide blade
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut #12 38mm 1.5″ Wide Comb Attachment
$29.97$19.99In Stock
ALL CLEARANCE SALES ARE FINAL. Mastercut's super wide comb attachment, the perfect finishing tool for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- life-changing wide comb attachment
- 32mm (1 1/4″) clipping height
- Strong and rigid stainless steel teeth
- Fits Mastercut #30w or #15w wide blade
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut Set of 4 Extra Long Wide Comb Attachments
$110.00$79.99In Stock
ALL CLEARANCE SALES ARE FINAL. Mastercut's set of 4 super wide comb attachments, the perfect finishing tools for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- Strong and rigid Stainless Steel teeth
- Recommended to use with Mastercut 15W or 30W wide blades
- Includes 4 extra long wide comb attachments:
- Extra-long wide blade comb attachment #7 22mm ⅞,
- Extra-long wide blade comb attachment #8 25mm 1",
- Extra-long wide blade comb attachment #10 32mm 1 1/4”,
- Extra-long wide blade comb attachment #12 38mm 1.5"
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut Snap-on Comb Attachments
$49.99$39.99In Stock
A set of 9 high quality combs fully compatible with (will fit) standard clipper blades. Click HERE to see all Comb Attachments
- Includes 9 combs: 8 standard size combs like the ones in Wahl set plus an extra large 32mm comb
- Strong and durable
- Spring and rigid stainless steel teeth
- Recommended to use with Mastercut 30 blade but will fit other standard 30 blades
- Come in a plastic case
Click HERE to see all Mastercut Products