Mastercut #10 Blade
$31.99Original price was: $31.99.$22.39Current price is: $22.39.
- Superior quality Mastercut #10 blade (1.6mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut #15 Blade
$31.99Original price was: $31.99.$22.39Current price is: $22.39.
- Superior quality Mastercut #15 blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Click HERE to see all Blades Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #40 Blade
$31.99Original price was: $31.99.$22.39Current price is: $22.39.
- Superior quality Mastercut #40 blade (0.25mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Click HERE to see all Blades Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #3F Blade
$48.99Original price was: $48.99.$34.29Current price is: $34.29.
- Superior quality Mastercut #3F blade (13mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips.
Click HERE to see all Blades Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #4F Blade
$42.99Original price was: $42.99.$30.09Current price is: $30.09.
- Superior quality Mastercut #4F blade (9.5mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Click HERE to see all Blades Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #5F Blade
$34.99Original price was: $34.99.$24.49Current price is: $24.49.
- Superior quality Mastercut #5F blade (6.3mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on standard clippers from Andis, Wahl, Oster and other brands.
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Click HERE to see all Blades Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #15W Wide Blade
$44.99Original price was: $44.99.$31.49Current price is: $31.49.
- Superior quality Mastercut #15w wide blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on wide combs from Mastercut (also sold under different names, including Furzone and AGS wide combs)
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Click HERE to see all Blades Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #6FW Wide Blade
$54.99Original price was: $54.99.$38.49Current price is: $38.49.
- Superior quality Mastercut #6fw wide blade (1.2mm)
- ProEdge-X quality guaranteed faster, smoother clipping with 25% more cutting edges than other brands
- Made from high-grade carbon steel, ice tempered and chrome plated to deliver optimal strength and durability
- For use with snap-on wide combs from Mastercut (also sold under different names, including Furzone and AGS wide combs)
- CLICK HERE to learn how to send shears and blades to PetStore.Direct Sharpening and Repair center
Click HERE to see all Blades Blade Care Tips: To preserve the life of your blades and maintain optimal cutting performance, here are a few hints and tips. Before you begin clipping, apply a thin film of oil to the mating surfaces of the cutting blades and tension spring guide. Follow our quick and easy 3-2-1 approach to keep your blades cutting fast and smooth.
If you are clipping for long periods, reapply oil and occasionally use a coolant spray to reduce surface temperature. This will help prevent clipper rash and irritation to the skin.
If your blade starts to drag, leaving tram lines in the hair, this is often caused by an accumulation between the upper and lower blades. To remedy this, and with your clipper still running, flush out hair clippings and dander by gently submerging the lower blade into washing solution. Remove and wipe the outside surface with a clean dry cloth and, reapply blade oil before clipping again.
Click HERE to see all Mastercut Products
Mastercut #7 22mm ⅞” Wide Comb Attachment
$27.97
ALL CLEARANCE SALES ARE FINAL. Mastercut's super wide comb attachment, the perfect finishing tool for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- life-changing wide comb attachment
- 22mm (7/8″) clipping height
- Strong and rigid stainless steel teeth
- Fits Mastercut #30w or #15w wide blade
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut #8 25mm 1″ Wide Comb Attachment
$27.97
ALL CLEARANCE SALES ARE FINAL. Mastercut's super wide comb attachment, the perfect finishing tool for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- life-changing wide comb attachment
- 25mm (1″) clipping height
- Strong and rigid stainless steel teeth
- Fits Mastercut #30w or #15w wide blade
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut #10 32mm 1.25″ Wide Comb Attachment
$29.97
ALL CLEARANCE SALES ARE FINAL. Mastercut's super wide comb attachment, the perfect finishing tool for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- life-changing wide comb attachment
- 32mm (1 1/4″) clipping height
- Strong and rigid stainless steel teeth
- Fits Mastercut #30w or #15w wide blade
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut #12 38mm 1.5″ Wide Comb Attachment
$29.97
ALL CLEARANCE SALES ARE FINAL. Mastercut's super wide comb attachment, the perfect finishing tool for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- life-changing wide comb attachment
- 32mm (1 1/4″) clipping height
- Strong and rigid stainless steel teeth
- Fits Mastercut #30w or #15w wide blade
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut Set of 4 Extra Long Wide Comb Attachments
$110.00Original price was: $110.00.$79.99Current price is: $79.99.
ALL CLEARANCE SALES ARE FINAL. Mastercut's set of 4 super wide comb attachments, the perfect finishing tools for increasing clipping speed and overall efficiency. Compatible with Andis and Oster clippers
- Strong and rigid Stainless Steel teeth
- Recommended to use with Mastercut 15W or 30W wide blades
- Includes 4 extra long wide comb attachments:
- Extra-long wide blade comb attachment #7 22mm ⅞,
- Extra-long wide blade comb attachment #8 25mm 1",
- Extra-long wide blade comb attachment #10 32mm 1 1/4”,
- Extra-long wide blade comb attachment #12 38mm 1.5"
Click HERE to see all Blades Click HERE to see all Mastercut Products
Mastercut 10″ Groom Master Coarse & Detangling Comb
$59.99
Mastercut 10" professional comb, perfect for detangling long, thick or heavy coats Click HERE to see all Combs
- Split design for maximum versatility
- Tames frizzy and fly-away hairs
- Removes matts, knots and tangles and extracts loose dead hair with ease
- Triangular spine allows for excellent comfort and control
Click HERE to see all Mastercut Products
Mastercut 10″ Groom Master Finishing & Fluffing Comb
$59.99Original price was: $59.99.$41.99Current price is: $41.99.
Mastercut 10" professional comb, perfect for fluffing your dog's coat for clipping, or adding a finishing touch Click HERE to see all Combs
- Split design for maximum versatility
- Tames frizzy and fly-away hairs
- Great for fluffy or wooly coated breeds
- Triangular spine allows for excellent comfort and control
Click HERE to see all Mastercut Products
Mastercut 10″ Groom Master Medium & Fine Comb
$59.99Original price was: $59.99.$41.99Current price is: $41.99.
Mastercut professional comb, perfect for everyday general grooming Click HERE to see all Combs
- Split design for maximum versatility
- Tames frizzy and fly-away hairs
- Penetrates the coat quickly and efficiently
- Triangular spine allows for excellent comfort and control
Click HERE to see all Mastercut Products
Mastercut Storage and Disinfecting Caddy for Blades
$19.99Original price was: $19.99.$13.99Current price is: $13.99.
The perfect way to store blades that allows to use a blade care solution and disinfect them at the same time extending blades life time. How to Use: Place blades into the caddy. Pour Redip blade solution into the caddy and close the lid.
- Stores 10 blades
- Blades stay safe in top position and avoid damage
- Perfect blade storage for mobile groomers
- We recommend using it with Redip blade care solution
Click HERE to see all Blade Care and Storage Click HERE to see all Mastercut Products
Showing all 17 results
